Air Filtration

21May 2018

On 6 December 2017 the Federal Court of Australia ordered that SPX Vokes UK Ltd pay Laminar costs and amend the registry in favour of Laminar in respect to ownership of the Vokes Trademarks in Australia.

SPX Vokes UK Ltd is an overseas affiliate of SPX Corp USA a NYSE publicly listed company head quartered in Charlotte North Caroliner USA, with a reported turnover of $2.4B . SPX Vokes applied using  section 81 of the trademarks act to claim ownership of Laminars property in Australia to which the Australian Trade Marks Office acquiesced. Laminar appealed this decision in the Federal Court and the matter was heard by Justice Robertson, who justly overturned the decision and awarded the Australian trademarks and costs to laminar Air Flow Pty Ltd the registered owner of the trademarks.

Vokes is a well-established brand in Australia, having first established in 1937 and then registering the “Vokes” name as a trade mark brand in December 1959. The Vokes trade mark name was approved on the basis of the significant trade established by the Australian entity. Vokes established its first air filtration manufacturing plant in Australia at Rockdale Sydney in 1962 and has continuously supplied the Australian, New Zealand and Asian export markets with quality filtration products.

Since 1993 Vokes has held ISO/QMS certificate number FS6054110 for design and manufacture of air filtration equipment, including biological safety cabinets, cytotoxic cabinets, electrostatic filters, HEPA filters and related special products.

Laminar acquired the “Vokes” brand from BTR Environmental in 2000.

Today Vokes continues to manufacture and market its brand of products in Australia, through licensed use and manufacturing IP to the AES Environmental group. AES is a specialist Australian owned filtration manufacturer, engineering, service and sales organisation that also markets the Email, Clyde-Apac, Lemcol, Selson and IFC Brands in Australia and in many overseas markets.

For further information please contact the company media department on 1300 550 116.

 

14May 2018

AES Environmental exhibited at ARBS 2018 at the newly renovated ICC Sydney in Darling Harbour between 8th-10th May.

Brand new Re-loadable V-Cell is changing the air filtration industry

We showcased our brand new air filtration product featuring re-loadable filter media with 63 Pascal at 3.400 m3/h, the V-Cell F7 outperforms every energy rating.

As energy costs for more than 70% of an air filter’s total life-cycle cost, the Re loadable V-Cell can guarantee important savings on your energy bill. Because of its extremely low initial and average pressure drop, the v-cell is helping to reduce CO2 emissions.

Ideal for:

  • Retro-fit & system upgrades
  • Pharmaceutical applications
  • AHU environments that need to adapt to changing user requirements

Outer frame: HPE composite-polypropylne medium
Separators: EVA (Ethylene Vinyl Acetate) based hot melt
Sealant: Polyurethane
Gasket: Continuous half round polyurethane or flat EPDM
Temperature (max continuous): 70oC
Final pressure drop: 450 Pa
Humidity: 100% Relative Humidity

After a successful show, we will be sending out relevant information about our existing and new products. Keep an eye out for more details soon!

03Apr 2018

AES Environmental continues to develop its product mix, through engineering and clever use of plastics, AES can now offer a ceiling mounted HEPA module that is entirely free from metal – ideal for forensic, electronic, geological and magnetic applications.

 

2 3

 

27Feb 2018

AES Environmental will exhibit at ARBS 2018 – the official AIRAH Air Conditioning, Refrigeration and Building Services Exhibition.  Come along and check out our products while winning some prizes! This will be held between 8th-10th May 2018 at the newly renovated ICC Sydney, Darling Harbour.

Times:

  • Tuesday 8 May 10am – 6pm
  • Wednesday 9 May 10am – 6pm
  • Thursday 10 May 9am – 4pm

Hope to see you there!

Keep an eye out for more details soon…

ARBS pic3

18Jan 2018

Cytotoxic Standard Changes, Publication of AS2252.5.

Standards Australia has published a new document, AS 2252.5, which concerns the construction and performance validation for Cytotoxic Drug Safety Cabinet’s (CDSC’s). The aim of this letter is to provide you with a brief on some of those changes and how they may impact on your laboratory in the future.

AS2252.5 incorporates several key aspects of room design where previously this was contained in other standards. Notably, there is a requirement for a capture exhaust within the cytotoxic suite and certification requirements surrounding room pressures, air change rates and temperatures, to name a few. The standard draws these requirements from a number of source documents including ISO 14644 parts 1 & 3, AS 1668.2, HEPA standards and 1807 test method standards.

CDSC’s have carbon filters fitted in order to reduce the risk to the environment and personnel of potential gaseous contamination that could be generated within the work zone of a CDSC. It has been determined that the carbon filter, due to the nature of its use, is required to be replaced annually, at point of service. This is a significant cost to the regular annual certification process of any CDSC. The replacement of the carbon filter has been determined as necessary due to an inability to validate, on-site, the remaining adsorption capacity of the carbon within the media.

An ISO Class 5 cleanliness rating is required within the work zone of the CDSC. This test requires a technician to undertake particle counting within the work zone of the CDSC while the unit is ‘at rest’, the validating technician will be responsible for the reporting of the results. This is an additional process, beyond the current annual certification requirements, and will likely see an increase in service cost due to use of specialist equipment and labour.

Minor changes include a relaxation of sound level tests and lighting intensity tests. With the sound level range moving higher, to allow for a greater operating sound level and the lighting intensity reducing, to allow for lower lighting levels. This is in line with the requirements of AS2252.2, Class II Biological Safety Cabinet’s (BSC’s) and the tests are now considered optional.

In addition to the above, there are also a number of changes related to cabinet design. Those have been omitted from this document as it will have little impact on the annual certification of the equipment that you currently have in your laboratory.

For more information related to the above or if you would like to discuss further how these changes may impact on your facility, then please feel free to contact the AES team at your convenience.

11Aug 2017

Download Service Brochure & Form

To announce our new branch locations in Adelaide and Newcastle, AES Environmental is pleased to offer special rates for NATA testing and certification of your contamination control equipment.

AES Environmental is Australia’s oldest manufacturer of Class II, Class I, Laminar Flow products and has maintained an active NATA laboratory since 1975!

Our technicians are NATA endorsed to carry out certification works to:
- Class I and II Biological Safety Cabinets
- Laminar Flow Cabinets
- Fume Cupboards
- Cytotoxic Drug Safety Cabinets
- HEPA Filters
- Clean Room Validation including Particle Counting
- Operating Theatre Validation

AES is the original manufacturer of the following brand name products:
- Clyde-Apac
- Email Airhandling
- Contamination Control Laboratories
- Gelman Sciences
and continues to maintain spare parts for the above product lines.

Please contact our Sales and Service team on:
service@aesenvironmental.com.au
1300 550 116

We look forward to hearing from you!

07Apr 2017

AES Environmental Head Office in Sydney is moving, but don’t worry, we are not going far.

Due to continued growth and strength of Australian manufactured products, AES Environmental Sydney will be moving to 9A Pembury Rd, Minto, NSW 2566. AES Environmental is looking forward to the continued expansion of our services and manufacturing plant, as Pembury Rd allows AES Environmental to actively engage with its customers by providing areas for visitors to view AES Enivironmentals’ filtration test rigs and to learn about the Australian Standards and the groups manufacturing capabilities. Our customers will be able to visit us in our new premises towards the end of August, because we are only moving a few streets down, we anticipate only very limited disruption to regular service.

We look forward to being able to better supply our customers while we continue to develop our local manufacturing capabilities further.

AES Environmental Head Office

9A Pembury Rd

Minto

NSW

2566

07Apr 2017

We know it’s been a while since we saw you at ARBS 2016. Please check out our flyer that features a quick update of our latest projects.

AES Environmental is ready to fulfill your air filtration and pollution control needs from a single, integrated source. Our brands and products are market-leading names within their fields. Whatever business area you operate in, effective air filtration and pollution control is vital for your products, processes and people.

14Dec 2016

Our Clyde-Apac CG2000 Cytotoxic Drug Safety Cabinet (CDSC) was first produced in Australia in the late 1980′s. This model has only seen minor changes throughout the years with updates applied to the design as standards have developed. New technology has been introduced for the control system and fans, improving energy efficiency and ease of operation.

Fundamentally the series remains the same, tried and tested throughout the years and still as popular as ever. AES recently won a project for the supply of CDSC’s to the new childrens hospital in Perth along with projects in South Australia. This year AES has exported its CG2000 to 10 different countries, this has been a boost to our Australian Manufacturing and it demonstrates just how highly considered the Australian Standards are.

 

10Nov 2015

Ozone generators are becoming increasingly popular in IAQ applications. This is against the recommendations of the NSW Health Department who have issued a statement on the potentially harmful consequences of using ozone to treat contaminated air. Ozone generators are particularly common in Kitchen Exhaust applications

AES Environmental manufactures a kitchen exhaust system (EKEM) that utilises electrostatic precipitators, particulate and gas-phase filters that are just as suitable and won’t produce the toxic gasses that some other systems can.

IAQ is a serious matter and many serious chronic diseases are being attributed to air pollution. We have several solutions to help you improve your IAQ, If you would like some additional information or some assistance with your air filtration, please contact your nearest AES office.

Reference:  http://www.health.nsw.gov.au/environment/factsheets/Pages/ozone-generators.aspx